Whether you are trying to fill a bucket, or you are trying to take a shower, a weak, tiny trickle of water is not what anybody wants to see. Apart from being generally irritating, it also wastes a lot of time and doesn’t leave a good impression on any guests who might be visiting your home. So, what can you do to improve the water pressure in your home? Read on to find out.
Check the Valves
Every home usually has a primary water valve near the meter and it needs to be turned all the way for your water pressure to go up as high as possible. It isn’t uncommon for a contractor or a repairman to close the main valve during the repair and leave it only half open after they are done. You should check to see if that’s what the problem is.
Check the Regulator
If your house has a regulator to stop public water from rushing into your pipes at damaging pressures, check to see if it is working right, because if it is indeed malfunctioning, that is where the problem lies. Unless you know what you are doing, we recommend calling in a professional to check and replace the regulator, if necessary.
Clearing Clogged Heads
Minerals commonly found in water begin to get deposited inside water pipes after being in use for a long period of time. As a result, the pipes become clogged and constrict the water flow. How fast and how often this will happen depends largely on the mineral concentration in your water supply. While clearing pipes or changing them isn’t something that you should try to do without the help of a professional plumber, you can always try to improve the water pressure by cleaning the shower heads and the faucets with vinegar.
Checking for Leaks
If one or multiple of the pipes in the plumbing system is leaking, then it’s only natural that by the time the water makes its way through all those leaks, it would turn into a trickle. Detecting a leak is a tricky matter so you will need the help of a plumber to do that, however, you can check to see if the water meter reading keeps on rising even after you have turned off all water outlets in the house. If that happens, there’s definitely a leak.
Booster pumps are not cheap and they consume a fair deal of electricity but they can increase your water pressure significantly in certain cases. Sometimes, the fault is not in the plumbing system but the water supply itself. A water line that has to travel uphill from the municipal water supply or is too far away from it may not have the necessary pressure to begin with.
Be it cleaning the deposits, repairing a leaking pipe or installing a new booster pump, you will need to seek advice and help from an expert professional to improve your water pressure. Hiring the best plumbers in Adelaide is no longer a hassle, because you can book them right from your phone or computer these days. Before they arrive at the scene, though, it’s best if you have your home’s plumbing designs ready at hand because that will make their jobs easier and the service faster. Even if you don’t have them, it’s nothing to worry about, but things may take longer.