What to Expect During a Plumbing Inspection in Your Building?

We often overlook plumbing as an important part of our property. As long as we enjoy a smooth flow of clean water and an unhampered draining system in our bathtubs and toilet, we commonly took them for granted. Not until we encounter plumbing emergencies should we think that our plumbing system is a basic necessity. However, there’s a smart way to avoid overlooking our plumbing system. It’s by doing a regular plumbing inspection. Such a method needs commercial plumbing Sydney services. The question now is what to expect during a plumbing inspection in your building?

What is a Plumbing Inspection?

A plumbing inspection is a process of checking critical areas of a property’s plumbing system. The process is performed by a certified plumber. Its main goal is to prevent flooding and property damages from a poor plumbing system. 

According to commercial plumbing in Sydney, a regular plumbing inspection should be done at least once every 2 years. It helps you keep your plumbing system run smoothly through:

  • Early detection of burst, clogs, leaks on your pipeline that may cause damage to lives and properties.
  • Elimination of delayed work brought about by a poor plumbing system.
  • Prevent a drastic rise in the cost of your water bill.

What to Expect During a Plumbing Inspection to Your Building?

A plumbing inspection will cover all the risky components of your plumbing system. These include your drains, pipes, tanks, and valves. They also include other components of your cooling, gas, and heating system. The plumbing inspector from commercial plumbing in Sydney will assess all these areas for clogs, corrosion, drain problems, and leaks. Here’s what you should expect to happen. 

The plumbing inspector will shut your main water supply

To perform a visual inspection, there’s a need to shut off your property’s main water supply. They’ll check if the water meter still registers readings after the main valve is shut off. If your water meter still registers a reading after shutting off the main valve, it’s a clear signal of a leak. Commercial plumbing in Sydney will also check your main valve for any damages or defects.

The plumbing inspector may conduct a pressure test on your water pipes

Commercial plumbing in Sydney conducts a water pressure test by turning off the property’s water system from 75 psi to 100 psi. Using a gauge, they will check if the water runs smoothly both in low and high pressure. Low water pressure may be caused by blocks or clogs in your water pipe. While high water pressure can harm them. 

The plumbing inspector may fill your drainage systems with water

This is to ensure that your plumbing system is closely sealed and doesn’t overflow. An overflow is a sign of a blocked or clogged drain. These can pose a risk of flooding and may damage lives and properties. 

The plumbing inspector will assess the sewer lines from inside your property to the curb connection outside

Commercial plumbing in Sydney will thoroughly check your drainage system, septic tanks, and sewer pipes for any clogs, corrosions, and damages. This is to ensure that your sewer system doesn’t pose a risk of a sewer backup that may be detrimental to health and stressful.

The plumbing inspector will also examine all other drains, fixtures, and supply lines

Commercial plumbing in Sydney will test all connections, fixtures, and valves connected to your property’s cooling, gas, and heating system. They will figure out if there are signs of water damages on the internal and external parts. They’ll also check drains, flexible hoses, and gutters for any blockage or clogging. 

Admin@

Admin@

Top